The commonly used inspection equipment on the color-coated board production line must meet the inspection tests required by the national standards. Therefore, the experimental equipment of different color-coated board manufacturers is the same, and they are the most commonly used ones listed below:
1. Thermometer-air thermometer and surface thermometer.
2. Hygrometer.
3. Surface profiler or comparator.
4. Paint viscometer.
5. Thickness gauge-wet film thickness gauge and dry film thickness gauge.
6. Coating gloss and pigment detection equipment.
7. Adhesion tester.
8. T-bend tester.
9. Impact tester.
10. Pencils of various hardness.
11. Other commonly used solution titration instruments.

Answers

• 
  What is the difference between electric welding and two-shielded welding? 2024-09-18 09:05:52.0
• 
  What is the standard for the porosity of welded joints? 2024-09-14 17:01:23.0
• 
  What causes excessive residual austenite? 2024-09-14 03:47:59.0
• 
  Is square tube welding four-sided welding or only two-sided welding? 2024-09-13 13:26:09.0
• 
  Classification of silicon steel？ 2024-09-13 08:24:25.0