Square tube welding can be performed on four sides or only on two sides. These two methods are called four-sided welding and two-sided welding respectively.

Two-sided welding: When the welding quality is not high, just lay the pipe and the parts connecting the pipe flat on the ground and use a handheld arc welding machine to perform meat welding. After welding, the weld cannot be seen, the appearance is not worse than butt welding, and the reliability is also OK. It is suitable for some pipe connections and installations with low-quality requirements, such as some outdoor iron art, etc.

Four-sided welding: For some square tube welding situations that require higher strength or better appearance, skilled welders should use four-sided welding, that is, all four sides except the bottom are welded. It is suitable for some industries, ships, and other buildings that require higher strength. At the same time, the appearance of four-sided welding is better and more beautiful.

Answers

• 
  What is the difference between electric welding and two-shielded welding? 2024-09-18 09:05:52.0
• 
  What is the standard for the porosity of welded joints? 2024-09-14 17:01:23.0
• 
  What causes excessive residual austenite? 2024-09-14 03:47:59.0
• 
  Is square tube welding four-sided welding or only two-sided welding? 2024-09-13 13:26:09.0
• 
  Classification of silicon steel？ 2024-09-13 08:24:25.0