Stainless steel is used for metal sheets, decorative stamped wall panels, decorative tubes, for furniture frames, closet rods, handrails and other objects. It is a hard metal and is used for coating, but many processes must be cut first. When choosing cutting tools, the main ones are The following types.
1. Circular saw
Handheld circular saws are tools for cutting large stainless steel sheets and come in two basic types of metal cutting blades. The cheaper ones are abrasive blades or cutter wheels, which are made of abrasive grains and pressed into blades, and the fibers are bonded together through the blades.
These blades have a limited number of cuts and cannot cut very accurately. Special steel blades with thin cuts and specially shaped teeth are diamond or carbon coated for edge-critical cuts that are faster and last longer than abrasive blades.
2. Power shears
Power cutting is a handy tool for making delicate cuts like curves. The main problem when working with stainless steel is friction. Stainless steel is heated rapidly, and the heat transfer to the blade will soften and break.
Choose a fine-toothed tungsten carbide that does not respond quickly to heat, and run the saw at a slower speed to greatly reduce the frictional heating effect.
3. Band saw
Cutting band saws are used for cutting pipes and square stainless steel. Unlike carpentry band saws, the cutter cuts on a horizontal bed with the blade descending through the material. Some older metal band saws are upright, and some are made for wood or metal.
Blades for stainless steel have a similar tooth pattern to jigsaw blades and are made of tungsten carbide. Whether you are using a metal cutting band saw or a utility saw, the speed can be set to low for smooth cuts.
4. Handheld tools
Handheld rotary tools use cut-off wheel accessories to cut a variety of materials. Rotary tools equipped with fiberglass-reinforced cut-off wheel accessories can cut hardened steel. Turn on the saw to full parameters before starting to cut, Lower the saw to the surface and allow the saw to slowly cut through pass the stainless steel until the cut is complete.

Answers

• 
  What are the differences in thickness and production process between medium and thick steel plates and hot rolled steel plates? 20/12/2024 16:13:18
• 
  What are the differences between PE lining and plastic coating? 04/12/2024 17:18:59
• 
  What are the acceptance criteria for hot-dip galvanized square tubes? 03/12/2024 05:26:54
• 
  How to distinguish between 304 and 201 stainless steel plates? 29/11/2024 17:07:20
• 
  Stainless steel wire rope or galvanized steel wire rope, which one is stronger? 27/11/2024 15:03:48