Stainless steel angle steel is a steel material with two sides perpendicular to each other and at an angle. It can form various stress-bearing components and connections between components according to different structures.
Stainless steel angle steel has better load-bearing capacity. Since stainless steel angle steel is carbon structural steel and section steel with a simple cross-section, it can be used to construct metal components and factory building frames. In use, it requires better weldability, plastic deformation performance, and certain mechanical strength than ordinary angle steel. The raw material billet for the production of stainless steel angle steel is low carbon billet, and the finished stainless steel angle steel is transported in a hot-rolled, normalized, or hot-rolled state.
The corrosion resistance of stainless steel angle steel is related to the alloy elements contained in the steel. Chromium plays an important role in the corrosion resistance of stainless steel. When the chromium content in steel reaches about 12%, chromium will form a thin oxide film (self-passivation film) on the surface of the steel to prevent further corrosion of the steel matrix. In addition to chromium, there are also commonly used alloying elements such as nickel, molybdenum, titanium, niobium, copper, and nitrogen. Protecting the surface of carbon steel with paint or plating with antioxidant metals (such as zinc, nickel, and chromium) is not stainless steel.
Angle steel is a kind of carbon structural steel and simple section steel used in construction. The raw material billet for the production of angle steel is low carbon billet, and the finished angle steel is transported in a hot-rolled, normalized, or hot-rolled state. Stainless steel angle steel and ordinary angle steel are made of different raw materials, so their endurance capabilities are also different.

Answers

• 
  What is the difference between electric welding and two-shielded welding? 2024-09-18 09:05:52.0
• 
  What is the standard for the porosity of welded joints? 2024-09-14 17:01:23.0
• 
  What causes excessive residual austenite? 2024-09-14 03:47:59.0
• 
  Is square tube welding four-sided welding or only two-sided welding? 2024-09-13 13:26:09.0
• 
  Classification of silicon steel？ 2024-09-13 08:24:25.0