Hello, we can supply ASTM A53 hot-dip galvanized steel pipes, NPS 2 (DN50), Sch 40, plain end, ERW (Type E) and seamless (Type S), depending on the stock batch and your design requirements.

The flat end is beveled according to ASTM A53 for NPS 2: angle 30° (+5°/-0°), blunt edge 1.6mm ± 0.8mm.

If you have a pressure design check or project specifications specifying a type, please inform us of the required type (ERW / Seamless) and grade (Grade A / B). We will check the inventory and reply with the delivery date and corresponding MTC information.

Time：11/11/2026 16:24:32

Answers

• 
  Does aluminum rust? 11/11/2026 08:38:01
• 
  Does the MTC or inspection record specify the pipe end type, the measured value of the bevel angle/blunt edge (or the thread/groove standard), and the record of zinc plating treatment? 11/11/2026 01:00:00
• 
  Referring to ASTM A53 hot-dip galvanized steel pipe, NPS 2 (DN50), Sch 40, plain end, can you supply either ERW or seamless pipe? 11/11/2026 00:41:00
• 
  Can 40Cr seamless steel pipes be used directly? 10/11/2026 12:47:34
• 
  What are the differences between galvanized steel grating and hot-dip galvanized steel grating? 09/11/2026 05:35:29