1. If there is dirt on the surface of the product after stainless steel plate processing, it can be wiped with detergent water. However, it should be noted that the material of the product after stainless steel plate processing is mirror or brushed. If it is a mirror, pay special attention to the cleaning tools, and the rag must be clean and dust-free. In addition, there is a special cleaning agent for stainless steel cleaning, called stainless steel cleaning agent or stainless steel brightener, as well as a special care agent and stainless steel oil, which can remove stains and restore the brightness of stainless steel.

2 Tape marks If you want to remove the trademark on stainless steel or the tape marks on the film, you can wipe it with warm water and then wipe it with alcohol.

3 Surface oil stains If there are oil stains and other dirt on the surface of stainless steel, you can directly wipe it with a soft cloth and then clean it with ammonia water.

Answers

• 
  What are the differences in thickness and production process between medium and thick steel plates and hot rolled steel plates? 20/12/2024 16:13:18
• 
  What are the differences between PE lining and plastic coating? 04/12/2024 17:18:59
• 
  What are the acceptance criteria for hot-dip galvanized square tubes? 03/12/2024 05:26:54
• 
  How to distinguish between 304 and 201 stainless steel plates? 29/11/2024 17:07:20
• 
  Stainless steel wire rope or galvanized steel wire rope, which one is stronger? 27/11/2024 15:03:48