+86-400-1866-598 cs@chinasteelmarket.com +86-18864881658 (Whatsapp&Wechat)
Login | Register
Empowering small and medium-scale steel purchasing
Quickly obtain FOB/CIF price
Answer the question

Q: Connection methods for anti-corrosion steel pipes?

23/10/2026 16:59:17 3    answers in: Application
Social Share:
A

There are 5 common connection methods for anti-corrosion steel pipes, selected based on pipe diameter, working pressure, and coating type:

1.  Butt welding: The most widely used solution for DN50+ medium & high pressure pipelines (e.g. 3PE/FBE coated lines). We reserve 150- 200 mm bare ends for welding, and the joint will be repaired with a heat shrink sleeve or epoxy coating afterwards to maintain anti-corrosion continuity.

2.  Flanged connection: For positions requiring disassembly, such as valve and equipment inlets. Pipe ends are welded with standard flanges and sealed with gaskets and bolts.

3. Grooved (clamp) connection: For DN50-DN300 low-pressure water supply and fire protection pipes, mostly applied to plastic lined/coated pipes. It features fast installation and no on-site welding.

4. Threaded connection: For DN15-DN50 small-diameter low-pressure branch pipes, with standard NPT / BSPT threads.

5. Socket & spigot connection: For large-diameter gravity flow drainage and sewage pipelines, sealed with a built-in rubber ring.


Time:12/11/2026 16:05:54

A

There are various methods for connecting anti-corrosion steel pipes. The choice depends on balancing factors such as connection strength, construction efficiency, and the extent of damage caused to the anti-corrosion coating. The most suitable method varies based on the type of anti-corrosion coating and the specific operating conditions.

Welded Connection: This method offers the highest strength and best sealing performance, making it ideal for critical, permanent installations—such as high-pressure or high-temperature systems, as well as buried pipelines. However, welding destroys the anti-corrosion coating at the joint; therefore, rigorous post-weld coating repair is essential. Failure to do so creates a vulnerable point for corrosion, posing a significant risk.

Grooved (Mechanical Coupling) Connection: This is a rapid connection method in which a groove is rolled into the end of the pipe, and the pipes are then secured using a mechanical coupling (clamp) and a rubber sealing gasket. Its primary advantage is fast installation, while also avoiding the extensive thermal damage to the anti-corrosion coating that occurs with welding. Typically used for pipe diameters ranging from DN65 to DN400 and capable of handling operating pressures up to 750 psi, this method is widely employed in fire protection systems, water supply and drainage, and various industrial piping applications.

Flanged Connection: This method involves attaching flanges to the pipe ends—either by welding or by using loose-backing flanges—and then securing the two flanges together with bolts. Its key benefit is ease of disassembly and maintenance, making it well-suited for sections requiring frequent inspection or for connections to equipment and valves. Drawbacks include higher costs and the potential for leaks; furthermore, any welded joints still require anti-corrosion treatment.

Socket-and-Spigot (Bell-and-Spigot) Connection: In this method, the spigot end of one pipe is inserted into the socket (bell) end of another, with a rubber gasket or similar sealing material ensuring a tight, flexible joint. This approach is simple and fast to install, can accommodate a certain degree of ground settlement, and completely avoids any thermal damage to the pipe coating from welding. It is extensively used in large-diameter water transmission projects (e.g., DN200 and above), though its pressure-bearing capacity is generally lower than that of a welded connection.

Time:02/11/2026 15:15:04

A

Generally speaking, due to the relatively low cost of anti-corrosion steel pipes, welding is the preferred method for their connection. Due to limitations such as construction period, construction conditions, and geographical environment, some projects will also adopt other connection methods, such as threaded connection, flange connection, socket connection, and grooved connection.


1. Flange connections generally have advantages such as speed, ease of construction, and simple tools, but they cannot meet the requirements of most projects in terms of safety and sealing. Generally, this type of connection is suitable for low-pressure pipelines, such as sludge discharge pipelines.


2. Grooved connection: also known as clamp connection technology.


The application of grooved pipe fittings technology has made the complex process of pipe connection simple, fast, and convenient. This represents a significant step forward in pipe connection technology.

Grooved connectors include two product categories: rigid joints, flexible joints, mechanical tees, and grooved flanges; bends, tees, crosses, reducers, blind flanges, spiral welded pipes, etc.

Grooved pipe fittings that serve to connect and seal mainly consist of three parts: sealing rings, clamps, and locking bolts. The rubber sealing ring located in the inner layer is placed on the outside of the connecting pipe and overlaps with the pre-roll groove. Then tighten the clamp to the outside of the rubber ring, and then secure it with two bolts. Because the rubber sealing ring and clamp adopt a special sealing structure design, the grooved connection has good sealing performance, and its sealing performance is improved accordingly as the fluid pressure in the pipeline increases.


Grooved connections facilitate pipe connection operations, improve construction safety, enhance system stability, facilitate maintenance, save time and labor, and offer good economic benefits. Although the individual price of clamps is higher when using clamp connections, the overall benefits of the entire pipeline installation are higher than those of flange connections.


3. As an advanced method of connecting anti-corrosion steel pipes, clamp-type pipe fittings can be installed either openly or concealed, i.e., steel joints or flexible joints. Therefore, it has broad application prospects. It is suitable for fire-fighting water supply systems, air conditioning hot and cold water systems, water supply systems, petrochemical pipeline systems, thermal power military pipeline systems, sewage treatment pipeline systems, etc.

Time:23/10/2026 16:59:51

Timely Info Independent Platform Multiple guarantees Self-operated storage

China Steel Market

Empowering small and medium-scale steel purchasing


How can I help you?