According to the Chinese standard GB/T 706-2016, the specification dimensions of stainless steel angles include two parameters: side length and side thickness. The specific specification size can be chosen according to the need, and those common specifications are 50 x 50 x 5, 50 x 50 x 6, 60 x 60 x 6, etc. The unit used for these data is millimetre. The weight of a stainless steel angle is calculated based on its specification size and material density. In general, the density of stainless steel angles is 7.93 grams per cubic centimetre (g/cm³). According to the standard GB/T 706-2016, the permissible deviations of stainless steel angles include dimensional deviations and quality deviations. On the one hand, a certain deviation is allowed for the side length and the side thickness of the angle. Normally, the deviation range of the edge length and edge thickness is around ±0.5mm. On the other hand, the quality deviation of stainless steel angles mainly involves the permissible deviation of the weight and cross-sectional area of the angles.

Answers

• 
  What are the differences in thickness and production process between medium and thick steel plates and hot rolled steel plates? 20/12/2024 16:13:18
• 
  What are the differences between PE lining and plastic coating? 04/12/2024 17:18:59
• 
  What are the acceptance criteria for hot-dip galvanized square tubes? 03/12/2024 05:26:54
• 
  How to distinguish between 304 and 201 stainless steel plates? 29/11/2024 17:07:20
• 
  Stainless steel wire rope or galvanized steel wire rope, which one is stronger? 27/11/2024 15:03:48